Millermatic-135
Infinite voltage control with wire feed speed tracking provides broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted.
Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and calibrated, spring-loaded tension arm designed to make setup easier and faster.
Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires.
"Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
Built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled. Makes unit safer, and is easier to position torch to work before starting weld.
Thermal overload protection shuts down the unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
List Price
Base Model
Starting at:
$ 727.00 (US $)
Select a MIG Welder -View All All-in-One MIG Welders -View All MIG Power Sources -CP-302 -DELTA-FAB -DELTAWELD 302 -DELTAWELD 452 -DELTAWELD 652 -INVISION 354MP -INVISION 456MP -INVISION 456P -MILLERMATIC 135 -MILLERMATIC 175 -MILLERMATIC 210 -MILLERMATIC 251 -MILLERMATIC 350/350P -MILLERMATIC DVI -MILLERMATIC PASSPORT
Flux Cored (FCAW) (gas and self-shielded)
MIG (GMAW)
Watch Millermatic Setup and Procedure videos.
Light Industrial Applications
Light Fabrication
Maintenance and Repair
Farm and Ranch
Auto Body
Home
Input Power
Requires 1-Phase Power
115 V, 20 Amps 60 Hz
Rated Output
90 A at 18 VDC, 20% Duty Cycle
Output Power Range
30 - 135 Amps
Net Weight
60 lb (27.3 kg)
Power source included
10 ft (3 m), M-10 Miller MIG gun and cable assembly #195 605
10 ft (3 m) work cable with clamp
Factory-installed gas solenoid valve
Regulator and gas hose
Power cord and plug
Extra contact tips
Sample spool of solid wire
Information/settings chart
Set-up and operational video
Now here are the specs from the
Lincoln Electric website
Lincoln Electric SP-135 Plus
SP-135 Plus
Combination Wire Feeder/MIG and Flux-Cored Welder with Welding Cart
List Price:771.00 (USD) *See Details
K2299-1 SP-135 Plus/Welding Cart One-Pak
This user-friendly wire feeder/welder from Lincoln Electric is ready to help you make short work of many around-the-home jobs, hobby projects, autobody repairs or farm chores! The SP-135 Plus handles MIG welds on a wide range of materials including mild steel, stainless steel and aluminum. Flux-cored welds on mild steel are a breeze. Achieve outstanding performance on thin sheet metal to medium plate by fine-tuning the arc using the continuous output voltage and wire feed speed controls. The SP-135 Plus also boasts industry leading output and arc performance in the 115V machine class. To top it off, we've made it easy to get started virtually everything you need to MIG weld mild steel is included in one convenient package! Just add shielding gas.
Advantage Lincoln
Ready To Weld! Includes mild steel MIG wire and adjustable gas regulator and hose kit. Just add shielding gas (sold separately).
Continuous full-range adjustment of voltage and wire feed speed allows for fine-tuning of the arc and precise control of heat input.
Capabilities include welding 24 gauge through 5/16" mild steel plate. Install K663-2 to weld 22 gauge through 1/8" aluminum.
Designed to feed .023-.035" (0.6-0.9mm) diameter mild and stainless steel MIG wire, .035" (0.9mm) diameter flux-cored wire and .035" diameter 4043 aluminum MIG wire.
Welder settings reference chart conveniently located inside wire feed section door makes it easy to set the machine for mild steel welding jobs.
Gun trigger safety feature keeps welding wire electrically "cold" until trigger is pressed.
Adjustable brake spindle accommodates both 8" (200mm) diameter and 4" (100mm) diameter spools of wire.
Built-in "burnback" function insures proper wire stickout after each weld with no sticking in the weld puddle.
Engineered and built for dependable service and long life expectancy.
"Quick Release" idle pressure arm easily adjusts wire tension for positive wire feeding.
High torque low-RPM drive motor provides extra long life and quiet operation.
Electronic full range motor speed control compensates for power supply variations to maintain constant wire feed speed.
Electronic and thermostatic protection from current overload and excessive temperatures.
CSA NRTL/C approved.
Three year warranty on parts and labor. (90 days warranty on gun and cable).
Manufactured under a quality system certified to ISO 9001 requirements.
Processes
MIG Flux-Cored
Unit Includes
Magnumฎ 100L gun and cable assembly with .023/.025" contact tip, 10 ft. work cable and work clamp, 6 ft input power cord with NEMA Type 5-15P plug for connection to standard 115 volt receptacles, factory installed gas solenoid valve for MIG welding, adjustable gas regulator and hose for Ar and Ar-blend gases (regulator requires an adapter sold separately for use with CO2 cylinders), 2 lb. spool .025" SuperArc L-56 mild steel MIG wire and .030" contact tip, and K2275-1 Welding Cart. Shielding gas sold separately. Assembly required.
Welding Specifications
Rated CV Output Amps/Volts/Duty Cycle Output Range Wire Feed Speed Range (IPM) Wire Feed Speed Range (M/MIN) Solid Wire Size Range Cored Wire Size Range
90/18/20% 25-135A DC 50-400 1.2-10.2 .023-.035" .035"
hobart 110 welder:
Handler 140
The Handlerฎ 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.
500 500 $593.00 MSRP (US$)* (just welder)
#500 505 $655.00 MSRP (US$)* (welder with wheels and cylinder rack)
Comes complete with: Comfortable 10 ft. (3 m) H-10 MIG welding gun
Built-in gas valve
Regulator and gas hose
Power cord with plug
10 ft. (3 m) work cable with clamp
1 lb. spool of .030 in. (0.8mm) self-shielded flux cored welding wire
8 in (203 mm) wire spool adapter
Extra .030 in. (0.8 mm) contact tips
Weld set-up and parts information chart
Power CV
DC
1 Phase
Processes MIG (GMAW)
Flux Cored (FCAW)
Material Thickness Welds 24 gauge up to 1/4 inch
Skill Level Low
Applications Maintenance
Construction
Auto Body
Farm/Ranch
Rental
Home
Stock Numbers #500 500 115V, 60 Hz
#500 505 115V, 60 Hz
with Small Running Gear/ Cylinder Rack
Rated Output at 20% Duty Cycle 90 A at 19 VDC
63 A at 21 VDC (CSA Rating)
Current Range 25-140 amps
Max. Open-Circuit Voltage 28 V
Wire Feed Speed Range 40-700 IPM
50-740 IPM at no load
Amps Input at Rated Load, 60 Hz 115 V 20 15 CSA Rating
kVA 2.9 2.2 CSA Rating
kW 2.5 1.77 CSA Rating
Dimensions H: 12-3/8 in (315 mm)
W: 10-5/8 in (270 mm)
D: 19-1/2 in (495 mm)
Net Weight 57 lb (26 kg)
Welds 24 gauge up to 1/4 inch in steel
Proven built-in wire feeder with quick-release drive roll lever
Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
Separate "purge" setting to purge gas line and set flow rate without wasting wire
Easy access to polarity changeover includes storage holes for spare tips
Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
Self-resetting thermal overload and motor protection
personally I like the lincoln better it comes with more. (I'm a little bit biased)
happy buying
Linear Mode
